Setting the Base Ringer Volume
The base has three ringer volume settings: high, low, and off. You can change the ringer volume while in standby mode or while an incoming call is ringing.
1) Press the ringer key.
You hear the ringer at the current volume level
([
] high, [
] low, [
] off) (if you set the base ringer volume to off, "Ringer off " is announced) and it is displayed on the base.
2) Press the ringer key repeatedly until the desired ringer option appears.
3) The system displays the new ringer volume.
Temporarily Mute the Base Ringer and Call Screen
Press the 
(play/stop) key to temporarily mute the incoming ring and call screen. The ringer will sound with the next incoming call. To turn the ringer back on for this call, press the ringer key. To hear the answering machine and screen this call, press the
or 
/volume/select key.
Adjusting the Speaker Volume Level
You can adjust the volume of the base speaker by pressing the 
or 
/volume/select key on the base. Press the 
/volume/select key for louder or the 
/volume/select key for softer while the base speaker is being used except for menu mode. The numbers [ 
] 
] are displayed on the base indicating the volume levels. [ 
] being the softest and [ 
] being the loudest.
note
Although you have set the base ringer to off, the handset will still ring.
S E T T I N G U P Y O U A N S W E R I N G S Y S T
w w w . u n i d e n . c o m | S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 3 8 ] |
R E M