Uniden EXI3226 manual Install the rechargeable battery pack into the handset, Getting Started

Page 9

B. Install the rechargeable battery pack into the handset

The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed on the base unit.

Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time!

To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged.

1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2) Plug the battery pack connector (red & black wires) into the small, black jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for

a click to insure connection.

3) Make certain you have made a good connection by slightly pulling on the battery wires to insure that there is a secure connection. If the battery connector is not securely connected, the handset will not charge properly.

!

Use only the Uniden (BT-905) rechargeable battery pack supplied with your cordless telephone.

Replacement batteries are also available through the Uniden Parts Department at (800)554-3988, Monday through Friday from 8:00 a.m. to 5:00 p.m. or online at www.uniden.com.

GETTING STARTED

www.uniden.com

G E T T I N G S TA R T E D [ 9 ]

Image 9

Contents Page Page To Change Caller ID Options To Choose the Language Contents Welcome Features Controls and Functions 41 42 43 44 Do the following steps Setting up the PhoneGetting Started Install the rechargeable battery pack into the handsetBattery use time per charge Low battery alertCleaning the charging contacts Connect the base unit For 2 line subscriptions Setting the handset retainer clip for wall mounting Mounting the Base Unit on a WallStandard wall plate mounting Direct wall mounting To change your AutoTalk and Cidcw Setting Menu OptionsChoosing the dialing mode To Enter Your Area Code Int’c orPress select/vol/ring Setting the language Basic 2-line operation Making and Receiving CallsRinger volume Adjusting the Ringer and Earpiece/Speaker VolumeEarpiece volume Base ringer volumeRedial Tone Dialing Switch-overTraveling Out-of-Range TipUsing the Page Feature Selecting a Different ChannelFlash and Call Waiting Using the Speakerphone Answering a Call from the BaseAnswering a Call from the Handset Dialing from Standby Mode Dialing from Talk ModeMaking a Call from the Base Making a Call from the HandsetPlacing a Call on Hold Using the Speakerphone Mute FeatureExtension In Use Line OperationWay Conferencing Press intercom on the base to contact the handset Press hold. The line 1 and line 2 LEDs flash redUsing Your EXI3226 intercom Paging from the base to handsetPaging from the handset to base Press intercom/ /int’c Transferring CallsWith the handset Storing Phone Numbers and NamesWith the base Steps for Entering Names and Special Characters If you make a mistake while entering a nameSelect/vol/ring Making Calls with Memory Dialing Press line 1 or line 2. The number dialsPress line 1 or line Editing a Stored Name and/or Phone Number Chain DialingPress select/vol/ring. The display Press select/vol/ring or delete/flash Erasing a Stored Name and Phone NumberWith the base Caller ID When the Telephone RingsPress cid/menu/hold Viewing the Caller ID Message ListLong Distance calls and Area Cord Setting/Cancellation ConfInt’c Storing a Caller ID number in a memory location Deleting Information from the Caller ID List Deleting a Caller ID messagePress delete/flash Deleting all Caller ID name/numbers Using Cidcw Caller ID on Call WaitingChanging the Digital Security Code Headset Installation Installing the BeltclipTo attach the beltclip To remove the beltclipBattery replacement and handling MaintenancePower Failure When the handset or base unit becomes slightly dirtySymptom Suggestion Charge/in use LED won’t TroubleshootingCase Action Liquid DamageBattery Information General InformationAC Adapter Information Precautions Installation Considerations Terminal Equipment Radio Equipment Industrial Canada InformationK, L IndexPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of you