Uniden EXI3246 Series manual Storing Phone Numbers and Names

Storing Phone Numbers and Names

Memory Dialing allows you to dial a number using just a few key presses. Your cordless phone stores up to 20 names/numbers in the handset.

1) Press the mem key in standby mode. ¨Select Memory¨ is	Select Memory
displayed.	01
	02	JOHN DOE

• In memory dialing

operation, you must

2) Press the vol/ring/ or vol/ring/ key, or enter a number (01 - 20) to select the memory location where you would like to store the number.

3)Press the mem or select key.

4)Press the mem or select key. ¨Store Name¨ appears

and a cursor flashes indicating that the display is ready for the name to be entered.

01:(Empty) Press Select to edit

Store Name

press a key within 30

seconds or the phone

will return to

standby mode. If you

return the handset to

the base, the phone

will return to

standby mode also.

• You have 30 seconds

If the Edit screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select

¨Go Back¨ to choose another location.

5) To enter a name (up to 13 characters), use the number keys.

Edit Memory01

Delete Memory01

Go Back

after pressing the

mem or select key to

enter the number you

wish to store.

Otherwise, an error

tone will sound and

the phone will return

•See the "Steps for Entering Names and Special Characters." (See page 25).

• Use the #/ and * /tone/ keys to move the cursor to the desired location.

• Use the delete/ch key to delete characters as needed.

• Press and hold the delete/ch key to delete all the characters.

• If a name is not required, go to step 6.

to standby mode.

MEMORY DIALING

www.uniden.com M E M O R Y D I A L I N G [ 23 ]