Uniden EXI 8966 manual Direct wall plate mounting

Page 47

Mounting the base unit on a wall (continued)

8 On the base unit, pull the handset retainer out of the slot.

9 Flip the retainer over and slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset

in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 1- 3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 9 on page 45 and 46 to mount the telephone.

46

Image 47

Contents I 8 9 6 Controls and functions Introduction FeaturesTable of contents About the digital security code Read this first6 to 9 toChecking the package contents Choose the best location Setting up the base unitConnect the base unit Tips Choose the dialing modePreparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Entering your area code Dialing from standby Making callsMaking a call with the handset Dialing from talk mode Making a call with the base Dialing from speaker phone modeRedialing a call with the handset Redialing a call with the base Receiving calls Auto Talk when ringingAny key Talk when ringing Mute when ringingTraveling out of range Handset ringer switchHandset earpiece volume Handset ringer toneReceiving a call with the base Base ringer switchBase speaker volume With the handset Memory storingStoring phone numbers and names Memory storing With the base Display a Programmed Number Memory dialingWith the handset Dialing from standby Dialing from talk mode Standard dialing With the base One touch dialingEditing a stored name and/or phone number Memory editingAfter about 2 seconds, Memory Erasing a stored name and phone number Memory erasingPress and hold until Store Number is displayed Mute When speaking with the baseWhen speaking with the handset When the phone is ringingWhen speaking on the base Way conference featuresWhen speaking on the handset Intercom from the handset to base Intercom featureIntercom from the base to handset To transfer from the base to the handset Call transfer featureTo transfer from the handset to the base Caller ID service Setting the Caller ID options When the telephone rings Viewing the Caller ID message list Long Distance call and area code settingsDeleting a Caller ID message Deleting information from the Caller ID listDeleting all Caller ID names and numbers Deleting information from the Caller ID list cont’dDial edit Calling a party from the Caller ID listLong Distance calls and Area code Storing Caller ID messages in memory Caller ID with call waiting service Call waiting features Changing the digital security code Standard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Additional informationHandling MaintenanceBattery replacement Power FailureSymptom Suggestion TroubleshootingPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youW, X, Y, Z IndexK, L Uniden America Corporation