Uniden EXT 1865 manual Direct wall plate mounting

Page 11

If the handset beltclip is attached, you cannot charge the handset with the display showing when the phone is mounted on the wall (See page 40).

8

8 On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval point is down. The retainer holds the handset in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1 Insert two mounting screws

into the wall, with their appropriate anchoring device, 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 9 on page 7 and 8 to mount the telephone.

Image 11

Contents Page Controls and functions Introduction FeaturesContents About the digital security code Read this first4 to 9 toChecking the package contents Choose the best location Setting up the base unitConnect the base unit If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Preparing the battery pack Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callWith the handset Dialing from standbyWith the base Dialing from talk modeCall Waiting AutoTalk when ringingAny key answer when ringing Receiving a callWith the base Adjusting the ringer and earpiece volume Redialing from standby Redialing a callCall waiting Redialing from the talk modeStoring phone numbers and names TelephonefeaturesMemory Store is With the base Program name Program number Making calls with memory dialingMemory dialing from standby Display a Programmed NumberMemory dialing from talk mode Edit Memory Editing a stored name and/or phone numberPage Erasing a stored name and phone number Mute When speaking with the baseWay conference Way conference featuresWhen speaking on the base When speaking on the handsetPaging from the base to handset Intercom featureUsing your EXT 1865 intercom Paging from the handset to baseTo transfer from the base to the handset Call transfer featureTransferring a call To transfer from the handset to the baseMessage Waiting Indicator Advanced calling featuresCaller ID Setting Caller ID optionsWhen the telephone rings Viewing the Caller ID Message list Long Distance call and area code settingsDeleting a Caller ID message When the pointer is at YesWhen the pointer is at No Deleting information from the Caller ID listDisplay returns to the summary screen Deleting all Caller ID name/numbersDial edit Using the Caller ID listCalling a party from the Caller ID list Long Distance calls and Area codeStoring Caller ID messages in Memory dialing Using Caller ID on Call Waiting service Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Symptom Suggestion TroubleshootingPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youV, W, X, Y, Z IndexK, L