Uniden EXI 6960 manual Editing a Phone Number in Memory

Page 20

Store Number 8175551212

Store Name

KAYSIE SCHLITZ

> Edit Memory 1 Delete Memory 1 Go Back

Memory Store

1> KAYSIE SCHLITZ

2 UNIDEN

NOTE

Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. You may also press mem to exit a memory menu at any time.

NOTE

If you select Go Back

at any time, no changes are made and the handset shows the Memory

Store screen.

EDITING A PHONE NUMBER IN MEMORY

Follow these steps to edit a phone number that you have already programmed into memory.

1) Remove the handset from the base.

2) Press and hold mem for two seconds. The display shows the Memory Store screen and any saved numbers.

3)Use the : and ; keys or number keypad to select the memory location you would like to edit. The < and > keys toggle between the names display and the numbers display.

4) Press select. The following screen appears with the memory location number that you have selected in the display

	You may move the > cursor down to Go Back and
NOTE	press select if you would like to exit this menu.

5) With > cursor next to Edit Memory, press select. The following screen appears, and a cursor flashes indicating that the display is ready for the name to be edited.

6)Use the : and ;keys to scroll through the character menu. Use the

<and >keys to move the cursor to the desired location, and enter the name.

7) Press select. The following screen appears, and a cursor flashes indicating that the display is ready for the number to be edited.

8) Enter the phone number with the number keypad.

17

Image 20

Contents MHz Cordless Phone with Caller ID Thank At Uniden, we’ll take care of you Contents MHz Technology Call Waiting Caller ID Line Backlit Display FeaturesWelcome Handset Base AC Adapter Rechargeable Battery Included in Your PackageDESK/TABLETOP Installation Plug the other end of the longRaise the antenna to a vertical position Wall InstallationSetting the Handset Retainer for Wall Mounting Standard Wall Plate Mounting Raise the antenna on the base Direct Wall Mounting Page Raise the antenna on the base Installing the Handset Battery Pack Slide the battery cover on until it snaps into placeCharging the Battery Pack Cleaning the Battery ContactsInitial battery charging Low battery indicatorHandset Earpiece Volume Setting the PULSE/TONE SwitchHandset Ringer Tone and Volume Using the page Feature Automatic Digital Code Security Following screen appears Once you have found the handset, press any key to endMaking and Receiving Calls Flash and Call WaitingStoring a Phone Number in Memory A cursor flashes indicating thatUse the and keys to scroll through the character menu. Use Appears, and a cursor flashes indicatingEditing a Phone Number in Memory Press select if you would like to exit this menuUse the key to move the cursor to the Yes command Erasing a Number from MemoryPress select. The following confirmation Screen appearsUsing Memory Dialing Chain DialingMore effectively Using Caller IDSetting Up Caller ID Options Using Cidcw Caller ID on Call Waiting During a call when you hearScreening Your Calls Then the name does not appear on the second linePress talk and the number automatically dials Reviewing Caller ID NumbersCalling a Caller ID Number Storing a Caller ID Number Into a Memory Location Deleting a Caller ID NumberDeleting All Caller ID Numbers Press delete, and the following screen appearsUsing Redial Using the Tone FeatureSelecting a Different Channel Phone changes to a different channelTraveling OUT-OF-RANGE Quick Reference Chart May be weak. Charge the battery On the base unit for 15-20 hoursFrom the base unit Place the base unit away fromTalk mode Hours Standby mode Days N E R a LS E N D S E TPage Functionsand Ontrols