Uniden TXC580, TRU5865 manual Entering Your Area Code

•If your calling area requires 10-digit dialing, do not program this option.

•When the area code has already been stored in memory, the stored area code will be displayed. To change it, press xfer/del three times. Then enter the new area

code. Or you can use

/RocketDial/ or call id/ to move the cursor and edit the area code.

Entering Your Area Code

If you enter a 3-digit area code number in the “Area Code” option, your local area code does not appear in Caller ID messages. For calls received from outside your local area code, you will see a full 10-digit number.

1) When the phone is in the standby mode, press menu/mute.

2) Press + or - to move the pointer to “Caller ID Setup”, then press select/ch.

3) Press + or - to move the pointer to “Area Code”, then press select/ch.

4) Use the number keypad (0 to 9) to enter a 3-digit area code.

5)Press select/ch, and you will hear a confirmation tone.

6)Press end to exit.

[ 16 ] G E T T I N G S TA R T E D