Uniden EXR 2480 manual Direct wall plate mounting

Page 12

If the handset beltclip is attached, you cannot charge the handset facing forward when the phone is mounted on the wall (See page 49).

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset

in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws with anchoring devices suitable for the wall material where the base unit will be placed.

TOP

1 Insert two mounting screws

 

 

 

 

 

 

 

3/16 in.

 

 

 

 

 

 

 

into the wall, (with their

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appropriate anchoring device),

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-15/16 inches apart. Allow

 

 

 

 

 

 

 

 

about 3/16 of an inch between

 

 

 

 

 

 

 

3-15/16 in.

the wall and screwheads for

 

 

 

 

 

 

 

 

mounting the phone.

 

 

 

 

 

 

 

 

2 Refer to steps 1 through 9 on

 

 

 

 

 

 

 

 

page 7 and 8 to mount the

 

 

 

 

 

 

 

 

telephone.

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Features IntroductionControls and functions 46 47 48 49 Contents Next, choose the best location to set up the base unit Read this firstBase unit HandsetChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to ToneContact your telephone company for Assistance PulseMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Preparing the battery pack Install the battery pack with the label downSlide the battery cover Forward until it snaps intoBattery use time per charge When the battery charge becomes lowCleaning the battery contacts Charging optional battery packsSetting the Caller ID options Standby mode, pressAuto TalkOff Cidcw On Area Code Press ¥or »to move the cursor to the item that is to be setEntering your area code Auto TalkOffMaking a call On-hook dialingExample Other OperationsOff-hook dialing Talk HighDial the phone number Example Enter Talk 017Receiving a call From the handsetFrom the base Phone rings. The status LED on the base flashesAdjusting the ringer and earpiece volume This switch turns the base ringer on or offRinger High Ringer LowRedialing a call On-hook redialingOff-hook redialing Last phone number entered can be quickly redialedUsing the speakerphone Page/Intercom from the handset to base Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Storing phone numbers and names Memory StoreStore Number Store Number is817555330 Memory 3 StoredMaking calls with memory dialing On-hook memory dialingMemory Off-hook memory dialing 01234567890123 0118135543293Talk Talk High Talk 035Editing a stored name and/or phone number Edit Memory Delete Memory Go BackPress the ¥or » key to Store Name817858330 Memory 1 StoredMemory storage is complete Memory Store Memory Store isErasing a stored name and phone number Edit MemoryDown to Delete Memory Press memory to return to standby When speaking on the handset When speaking on the base with the handset off the baseWay conferencing Idfeatures Caller ID serviceWhen the telephone rings 11 1230PM813-8 3300 Viewing the Caller ID Message list NewTotal02 17 1230PMWhen the pointer is at Yes When the pointer is at NoDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers New Total02Delete All ? Yes Total00Using the Caller ID list Calling a party from the Caller ID list17 1230PM Uniden Corp Talk Select8178583300Storing Caller ID messages in Memory dialing Select LocationUsing Caller ID with call waiting service Talk Uniden CorpIntegrateddeviceanswering Integrated answering deviceSetting the clock Setting your greeting » Preset Message» Recording your personal greeting » Choosing between two greetings» Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Using your answering system Playing your messageRepeating a message Skipping a message Deleting a message» Deleting individual message » Deleting all messagesVoice memo Recording a conversationStop recording. The system Returns to standbyRemote access away from home Command FunctionRemote room monitor Headset installation Changing the digital security codeInto the headset jack. Your Phone is ready for hands-free ConversationInstalling the beltclip To attach the beltclipTo remove the beltclip Maintenance Battery replacement and handlingWhen slightly dirty When very dirtyTroubleshooting Symptom SuggestionSymptom Suggestion Specifications GeneralBase unit HandsetIndex K, LW, X, Y, Z Page Page
Top Page Image Contents