Uniden EXR 2480 manual Entering your area code, Auto TalkOff

Entering your area code

If your calling area requires 10-digit dialing, do not program this option.

If you enter your 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

1

2

When the phone is in the standby mode, press setup/pause .

1 Auto Talk:Off￿

2 CIDCW :On￿

3 Area Code:

Press 3 to select “Area Code”.

3

4

1 Auto Talk:Off￿

2 CIDCW :On￿

3 Area Code:

Press select .

1 Auto Talk:Off￿

2 CIDCW :On￿

3 Area Code:

Use the dial buttons ( 0 to 9 ) to enter the 3-digit area code.

5 Press	select .
A beep sounds and the displayed area code is entered.
6 Press	setup/pause to complete the setting. Or return the
handset to the base unit to complete the setting mode and set
the handset to the standby mode.
	When the area code has	1 Auto Talk:Off￿
	already been stored in
		2 CIDCW	:On￿
	memory, the stored area
		3 Area Code:		8	17
	code will be displayed. To
	change it, use the delete and keypad to enter the new
	area code.
12	To complete the setting, press	setup/pause	or return the
	handset to the base unit.