Setting Up Your Phone
Extending the Antenna
Before using your phone, be sure to raise its antenna to the vertical position.
Installing the Battery Pack
| The memory backup feature allows up to 3 |
| minutes after disconnecting the old battery |
NOTE | pack to install a new one without losing any |
phone numbers stored in memory. | |
|
|
1. Remove the handset battery cover.
2. Plug the battery’s cable into the handset.
NOTE
The plastic connectors will fit together only one way. Make sure the battery’s connector is properly aligned.
3. Replace the battery cover.
▼Charging the handset
Place the handset on the base to charge.
▼Low Battery Indicator
When the Battery Pack in the handset is low and needs to be charged, the batt low led flashes every 3 seconds.
If this occurs while you are on the phone, you hear an alert tone. Complete your call as quickly as possible, and return the handset to the base for charging.
▼Cleaning the Battery Contacts
To maintain a good charge, it is important to clean all battery contacts on the handset and base about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids
or solvents.
Adjusting Ringer/Volume Controls
▼Ringer Tone and Volume
1.While the phone is not in use, press G.
2.The phone has two ringer tones, each with two volume
levels. Press Gagain until you select the ringer tone and volume you want.
▼Setting the Receiver Volume
1.While you are on a call, press V.
2.The phone has two receiver volume levels, one soft and
one loud. Press Vagain until you select the receiver volume you want.
7