
note
•When a long distance call has been set, "1" appears in the display.
•If the Caller ID message was received as a private/ unknown number, or the message does not have the number, you cannot store the message in the Phonebook. If it was received as private/ unknown name, the message will be stored as <No Name>.
•Even if the 100 memory locations are full (50 locations for the base), the message will be stored in the Phonebook. However, the message will be erased from the Caller ID list.
Talk mode
1)During talk mode press cid to review Caller ID message.
2)Select the Caller ID message you want to dial (see "Viewing the Caller ID List" on page 49).
3)When the Caller ID number is located, press the DIAL soft key and the number will be dialed.
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone number and name of the party on the Caller ID list can be stored in memory.
1)When the phone is in standby mode, select the Caller ID message to be stored. Then press the STORE soft key. Store/Edit Name appears. If the Caller ID message is already stored in memory, you will hear a beep and This data is already stored!! appears. The number will not be stored.
2)To complete the setting, follow the steps
[ 5 2 ] C A L L E R I D | w w w . u n i d e n . c o m |