Seven-Digit Dialing
In some areas, the telephone company may allow you to place a local call by dialing only 7 digits (instead of 10). If this is the case in your area, you can program your local area code in your phone. Programming your area code will allow you to see the caller’s
To program your local area code:
) Press [menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
2)Use the number keypad ([0] through [9]) to enter a
3)Press [select/
]. You will hear a confirmation tone.
Using the Intercom (Multi-handset packs only)
You can use the intercom to talk to another handset without using the phone line.
Making an Intercom Page
From the handset:
) With the phone in standby, press [hold/int’com/xfer].
2)Use [
] or [
] to select the handset you want to talk with, then press [select/
]. Select ALL to page all other handsets.
3)To cancel the intercom page, press [
].
Note: Intercom paging will be cancelled if any of the following things occur:
•You receive an outside call or an intercom page while selecting the other handset.
•You do not select a handset within 30 seconds.
•The party does not answer the page within one minute.
•The party is busy.
•The party is out of range (UNAVAILABLE appears in the display).
34