Entering a Pause in Memory Dialing
If you would like to use a phone number stored in memory to access voice mail, for example, you can store a pause in the phone number sequence.
To use this function, follow steps 1 and 2 in “Storing a Number in Memory“, then press the pause button on the handset or press redial/p on the base to place a pause in the phone number sequence. Each pause counts as one digit and represents a two second delay of time between the digits.
Follow the remaining steps in the “Storing a Number in Memory“ section to complete the operation.
Storing Mixed Tone/Pulse Numbers
If your phone is set up for pulse dialing, you can store a mixed mode number (up to 20 digits) to easily access long distance services.
1.Remove the handset from the base and press memory, or press memory for the base.
2.Enter the number to be dialed in pulse mode.
3.Press * / tone or press * / tone on the base. The tone button counts as one digit and enters a pause.
4.Enter the number(s) to be dialed in tone mode.
5.Press memory, or press memory for the base and a number
Remember, the phone number you wish to store cannot have more than 20 digits, including the pause. (The pause button counts as one digit.)