If you select a memory location that does not have a stored number, the handset or the base will beep rapidly and the phone will not dial.
Dialing a Stored Number
With the Handset
To dial a phone number stored in memory, press talk, then press memory and enter the memory location
With the Base
1.Press speaker.
2.Press memory. Enter the memory location number
Chain Dialing
Each 10 memory locations on the handset and the base are not limited to phone number. You may want to store in memory a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, when you are prompted to enter the account number, simply press memory and then the location where the special number has been stored.
Store your special number in memory as you would a phone number. (Refer to “ Storing a Number in Memory“ on page 18).
Enter a “pause“ in the sequence as necessary. A “pause“ counts as one digit and represents a two second delay in time between digits as they are sent.
[ 20 ] M E M O RY D I A L I N G