Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline (see At Uniden, we’ll take care of you! on page 54).
Symptom | Suggestion | |
The charge LED won’t | • Make sure the AC adapter is plugged into the base or the charger (if you have more | |
illuminate when the | than one handset) and wall outlet. | |
handset is placed in the | • Make sure the handset is properly seated in the cradle. | |
cradle. | • Make sure the charging contacts on the handset are clean. | |
The audio sounds weak. | • Move the handset and/or base away from metal objects or appliances and try again. | |
• Make sure that you are not too far from the base. | ||
| ||
| • Make sure that you are not too far from the base. | |
| • Make sure the line is not in use. If an outside call is already using a line, you cannot | |
| use that line to make another outside call. | |
Can’t make or receive | • Make sure your handset is registered to the main base unit. | |
• Check both ends of the base telephone line cord. | ||
calls. | ||
• Make sure the AC adapter is plugged into the base and wall outlet. | ||
| ||
| • Disconnect the AC adapter and reconnect. | |
| • Change the Digital Security Code (see Changing the Digital Security Code on | |
| page 41). | |
| • Keep the handset away from microwave ovens, computers, remote control toys, | |
Severe noise interference. | wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, | |
and electrical appliances. | ||
| ||
| • Move to another location or turn off the source of interference. | |
The Caller ID does not | • The call was placed through a switchboard. | |
• Call your telephone provider to verify your Caller ID service is current. There may be | ||
display. | ||
a problem with your Caller ID service. | ||
|
43