example), press REDIAL/PAUSE to insert a
Retrieve your messages
When you have new messages, the voice message icon ( ) appears in the display, and the light at the top of the handset blinks. Press MESSAGES to dial the programmed access number for this handset.
Reset message waiting indicator
The voice message icon should disappear after you listen to all your new messages. If it doesn’t, you can reset it manually.
1.With the phone in standby, open the menu and select Global Setup.
2.Select VMWI Reset, then select Yes.
3.The blinking light will turn off anddisappears.
4.Press END.
Finding a Lost Handset
With the phone in standby, press Find on the base. All the handsets will beep for 1 minute; to end the page, press Find again or press any key on any handset.
Expanding Your Phone
Compatible Accessory Handsets
Your base supports a total of six cordless handsets: the one that came with the base and up to five other compatible accessory handsets. The following accessory handsets are compatible with this phone:
DCX330 accessory handset with charger
DRX332 accessory handset with MULTIRANGETM charger
DWX337 waterproof accessory handset with
Refer to the individual Owner’s Manuals for detailed information about each handset.
16
Setting Up MULTIRANGE Chargers
If you expand your phone system by purchasing a separate MULTIRANGE charger, you will have a separate manual discussing the charger in detail, including how it works, how to reset it, how to attach the wall mount bracket, etc.
Your base can support a total of 2 DRX332 MULTIRANGE chargers.
The MULTIRANGE charger extends the range of your base in all directions, including up and down. Each handset will automatically connect to the charger or the base, depending on which signal is stronger.
To place a MULTIRANGE charger
Make sure you have a strong signal from the base (at least 3 bars in the handset display).
Put the charger at least 35 feet away from the base or any other MULTIRANGE charger. (If you put the charger on a different floor from the base, don't forget to allow 35 feet vertically, also.)
For more information, see the DRX332 Owner’s Manual.
Registering Handsets
The handset that came packaged with the base is already registered to the base for you.
However, if you purchase any accessory handsets separately, you must
register the handsets to the base before you can use them. Handsets that aren’t registered display a Handset not registered message.
1.With the phone in standby, press and hold Find on the base for about 5 seconds.
2.On the handset you want to register, press and hold # until the display says Handset Registering (about 2 seconds).
3.After the handset displays Registration Complete (about 30 seconds), press TALK/FLASH and make sure you get a dial tone.
17