Placing a Call

To place a call with your XC 310:

1.Remove the Handset from the Base Unit and press TALK.

2.Dial the number you are calling.

3.When you have finished the call, press TALKor return the Handset to the Base Unit.

NOTE: If you don't place the Handset back on the Base Unit, you will need to press TALKto hang up the phone.

Selecting a Channel

TheCHANNELbutton on the Handset allows you to choose among factory set channels. If you are receiving static or other interference on a channel, press the button to switch to another channel. This function works only when the phone is in use.

NOTE: If you have more than one cordless phone in your house, they must be set to different channels.

Using the Flash Button

Use FLASHto send a timed "hook-flash" on the telephone line for accessing services such as call waiting, etc. To use this feature, simply press the

FLASH/R. TONEbutton while operating the Handset.

Setting the Receiver Volume

While on a phone call, press the VOLUME/AVOLbutton. to select either loud or soft volume.

Using the Redial Button

ROUPdials the last number that you called. This feature is extremely useful when the number you called is busy. To use this feature, simply press FLASH,then ROUPThe. last number called will then be dialed again.

NOTE: If any other key is pressed before ROUP,the phone will not redial the last number.

Answeri ng a Call

Your XC 310 will ring when someone is calling your number. If your Handset is not in the BaseUnit,pressTALKto answer the call. If your Handset is in the Base Unit, the AutoTalkfeature allows you to answer the call by simply lifting the Handset from the Base Unit and beginning your conversation.