Uniden WXI2077 Series manual Using a Voice Mail Service, Setting the voice mail signaling tone

Using a Voice Mail Service

If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. When there are messages waiting in your voice mailbox, the new message LED on the handset flashes, and appears in the handset display.

If you program your access number into your phone, you can simply press /Mute to access your voice mail. Your voice mail service provider should provide you with the access number, signaling tone, and other specifics when you enroll.

Setting the voice mail signaling tone

If you are having trouble with your message waiting indicator on your phone not illuminating when you have waiting messages, you will need to contact your service provider and inquire as to which type of message notification signal — either Frequency Shift Keying (FSK) or Stutter Dial Tone (SDT) — their service uses.

If your voice mail service uses an FSK message signal to alert you of a new voice mail message, you must turn off the Voice Mail Tone. If your voice mail service uses an SDT message signal to alert you of new voice mail messages, you can leave the Voice Mail Tone on.

Follow the instructions below to set up your cordless phone settings:
1)	Press Menu/Select. Select the GLOBAL SETUP menu, and then the
	VOICE MAIL TONE submenu.	P
) Move the cursor to set the SDT Voice Mail Tone to ON or OFF.		 1HH

3)Press Menu/Select. You hear a confirmation tone.

41

Using Special Features