Uniden WXI2077 Series manual Weak or Hard to Hear Audio, New message LED

When you have this	Try...
problem...
The Caller ID does not	• Checking to see if the call was placed through a switchboard.
	• Asking your telephone company to verify your Caller ID service is current. There
display.
	may be a problem with your Caller ID service.
I can’t register the handset at	• Charging the battery for at least 25 hours.
the base.	• Resetting the handset (see page 49).
The handset doesn’t	• Register all handsets to the same base, and then select the same base on all
communicate with other
	handsets (see page 14).
handsets.
	• Checking to see that there are not two handsets already using the conference	Troubleshooting
	feature (see page 37).
I can’t join the conversation.	• Checking to see that another handset is not in privacy mode (see page 39).
	• Register all handsets to the same base, and then select the same base on all
	handsets (see page 14).
The new message LED
flashes, but there are no new	• Resetting the Voice Mail Waiting Indicator (see page 42).
messages.

Weak or Hard to Hear Audio

If the caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset’s battery may be weak.

•Try adjusting the volume of the earpiece (see page 35) or the audio tone (see page 36).

•Try moving around while you’re on a call or moving closer to the base to see if the sound gets louder.

•Make sure the handset’s battery is fully charged.

47