You can adjust the ringer volume when the phone is in standby; to turn off the ringer, turn the ringer volume all the way down.
Finding the Handset
With the phone in standby, press Find on the base. All handsets beep for 1 minute. To cancel, press Find again or press any handset key.
Using the Phonebook, Caller ID, and Redial Lists
xxThe phone can store up to 70 entries in its phonebook.
xxIf you subscribe to Caller ID (CID) service, the phone stores the information for the last 30 received calls to the CID list. Contact your telephone provider for more information.
xxEach handset remembers the last 5 numbers you dialed on it. xxOnly one handset can access one of the lists at a time.
To... | Press... | |
open the list | Phonebook/left, Caller ID/right, or | |
Redial/pause. | ||
| ||
scroll through the list | Up or Down. | |
dial the current entry | Talk/flash or Speaker. | |
add 1 at the front of CID number | * before dialing for a toll call. | |
store the current CID or redial | Menu/SELECT, then select Store Into Pb. | |
entry to the phonebook | Edit the name and number as needed. | |
edit the current phonebook entry | Menu/select, then select Edit. | |
delete the current entry | Menu/select, then select Delete (or | |
Delete Entry). To confirm, select Yes. | ||
| ||
close the list | Phonebook/left. |
## When it’s in standby, the handset shows how many calls came in since the last time you checked the CID list.
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press Menu/select and then select Create New. Proceed to enter a name and number.
xxEnter the phone number (up to 20 digits) exactly as you would dial it.
xxIf you need to enter a pause between the numbers, press Redial/pause; you’ll see a P in the display. (The dialing will pause for about 2 seconds per a digit.) xxTo edit the number, press Intercom/clear to back up the cursor and delete
numbers.
Deleting All the Entries
With the phone in standby, open the list (phonebook, CID, or redial). Press Menu/ select and then select Delete All. To confirm, select Yes.