ENGLISH
Using the Sound Control Memory
You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored each of the following sources — FM1, FM2, FM3, AM, tape,
•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “Canceling Advanced SCM” on page 21.
“SCM” indicator | SCM |
|
|
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows:
•When “SCM LINK” is set to “LINK ON”, the selected sound mode can be stored in memory for the current source and the effect applies only to the current source. Each time you change the playback source, the SCM indicator flashes on the display.
•When “SCM LINK” is set to “LINK OFF”, the selected sound mode effect applies to any source.
Indication | For: |
| Preset values | ||
|
|
|
|
|
|
|
|
| Bass | Treble | Loudness |
SCM OFF | (Flat sound) | 00 | 00 | On | |
|
|
|
|
| |
BEAT | Rock or disco music | +02 | 00 | On | |
|
|
|
|
| |
SOFT | Quiet background music | +01 | Off | ||
|
|
|
|
| |
POP | Light music | +04 | +01 | Off | |
|
|
|
|
|
|
16
