Uniden CLX 465 owner manual Changing the Digital Security Code, Installing the Beltclip

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code:

1."System Reset" options ("De-register the Handset" and "Replacing the Base Setting") for all the handsets you have (see page 69).

2.Re-register each handset by following the steps on page 14.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset.

Press down until it clicks.

To remove the beltclip

Pull either side of the beltclip to release the tabs from the holes.

[ 1 5 ] Changing the Digital Security Code w w w . u n i d e n . c o m