Uniden 900 MHz manual Included with Your Phone, Setting up the Phone, Choose the best location

Page 3

Included with Your Phone

Base

AC Adapter

• Rechargeable Battery

Handset

Telephone Cord

 

 

Setting up the Phone

Do the following steps:

 

A. Choose the best location

C. Connect the base unit

B. Install the battery pack

D. Choose the dialing mode

A. Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS.

Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

The location should be close to both a phone jack and a continuous power outlet which is not switchable.

Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

B. Install the battery pack

Charge the battery pack for at least 15-20 hours before plugging the phone line into your phone.

1) Press in on the battery cover release and slide the cover down until it comes off.

2) Connect the battery pack connector observing correct polarity (black and red wires) to the jack inside the battery compartment.

Do not exert any force on this connection. It could cause damage to the battery or handset. The plastic connector will fit together only one way. Once you are certain that you have made a good connection, then insert the battery pack into the battery compartment. Do not pinch the wires.

3)Securely close the battery compartment cover by sliding it up until it snaps into place.

4) Place the handset in the base with the keypad facing forward.

2

Image 3
Contents Page Controls and Functions IntroductionChoose the best location Setting up the PhoneInstall the battery pack Included with Your PhoneConnect the base unit Battery use time per chargeLow Battery Alert Cleaning the Battery Charging ContactsUsing Your Phone Choose the dialing modeMaking and Receiving Calls Traveling Out-of-Range Adjusting the Ringer and Earpiece VolumeTone Dialing Switch-over TerminologyDialing a Stored Number Using the memory location featuresFlash and Call Waiting Storing a Phone Number in MemoryOne-touch RocketDial Chain DialingErasing a Stored Number from Memory Changing the Digital Security CodeSymptom Suggestion TroubleshootingPrecautions Installation Considerations