Uniden Cordless Telephone manual Finding a Lost Handset, Placing a Call on Hold

Finding a Lost Handset

To locate a misplaced handset, press [flash/find handset] key on the base when the phone is in standby. All regis- tered handsets wilt beep for 60 seconds, and PAGING appears on the handset display. To cancel paging, press any key on the found handset or press [flash/find handset] key on the base.

Note: If the battery pack is completely drained, the handset will not beep when paging.

Using Hold, Conference and Transfer

Placing a Call on Hold

1)During a call, press [int'com/hold] to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen wilt read, HOLD.

2)To return to the party on hold, press [C/flash] or [,q_)]on a handset or [,4_)]on the base. The phone will return to the holding party.

Note:

You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party's line will be discon- nected and the phone wilt return to standby.

• While a call is on hold, Caller ID and Call Waiting cannot be received.

Conferencing

If you have more than one handset, up to four people can participate consists of an outside line, two handsets, and the base speakerphone.

in a conference call. A four-way conference call You can easily join a call already in progress.

1)Press [€/flash] or [,i_)] on the handset or [,i_)] on the base to join the call.

2)To hang up, return the handset to the cradle or press [,]] on the handset or [,_>)]on the base. The other party will still be connected to the call.

42