Jensen Contents JBX100SR, Installation/Wiring Precautions, Setting Up and Installing Your Kit

Page 4

Contents JBX100SR

User/Install Manual

Antenna

(P/N 128-7041)

(P/N 118C1129)

AC/DC Power Adapter

1 pc. (P/N 136C3585)

Installation/Wiring Precautions

1.

If using the adapter, make sure the adapter cable

 

is not connected to an AC wall outlet until all inter-

 

connections have been made and verified. The

 

adapter power cable should be connected last.

2.

Incorrect installation may cause damage to the

 

system.

3.

During antenna placement/installation, refer to the

 

Antenna Aiming procedure outlined in the Shuttle

AC Power Cord

1 pc.

1 pc.

User Guide for JPNPR1.

Setting Up and Installing Your Kit

Boom Box

(P/N JBX100SR)

1 pc.

NOTE: The SIRIUS® signal can be received and processed virtually anywhere as long as there are no obvious satellite signal obstructions such as high terrain, trees, overhangs, etc. However, signal reception depends mainly on where you are, geographically, and where this place is with respect to the orbital paths of the Sirius satellites. In placing the antenna, therefore, these factors must be taken into account .

-4-

128-7041

4 of 12

Image 4
Contents Shuttle Boom BOX JBX100SR User Guide Congratulations FCC Regulations Installation/Wiring Precautions Contents JBX100SRSetting Up and Installing Your Kit Battery Installation Boom Box JBX100SR ControlsCabling Interconnections Installing the Shuttle in the JBX100SRRemoving the Shuttle From the JBX100SR Interconnect Diagram Installing/Positioning the AntennaAntenna Placement Considerations Specifications Cleaning the JBX100SR Boom Box MaintenancePeriodic Inspection Troubleshooting Fault Probable Cause RemedyMonth Limited Warranty