Boom Box JBX100SR Controls, Battery Installation

Boom Box JBX100SR Controls

The Jensen Sirius® Boom Box JBX100SR provides two control buttons, a Power On/Off -Volume control, and a pushbutton to toggle between Satellite Radio or an auxiliary audio input signal. A power-on LED is also located on the front panel.

1.PHONES Jack: Accepts a stereo headphone jack to provide private listening capability for the Boom Box.

2.SRS/AUX Selector Pushbutton: Pushbutton toggles between Satellite Radio and an external audio input signal (MP3, CD, etc.) present at the AUX input jack.

3.AUX Jack: Accepts an audio input signal from an external audio device. When

using the AUX audio input, turn the Shuttle off to preserve battery power. Adjust the volume level of the external audio device

to obtain audio output from the JBX100SR. The volume control on the external audio device should be set to mid-range.

4.Power On/Low Battery LED: The LED lights green when the Power On/Off Switch-VOL control is rotated clockwise (CW) to the On position. In addition, the LED will light red to alert the user that the batteries are nearly discharged. This condition may cause degraded performance of the JBX100SR.

5.Power On/Off Switch-VOL Control: Applies power to the Boom Box when rotated clockwise (CW) from the Off position. When in On position, increases or decreases the volume of the audio output signal from the JBX100SR. To increase the volume level, rotate the control CW. To decrease the volume level, rotate the control counterclockwise (CCW).

6.Release Button: Press this button to release and remove the Shuttle from the JBX100SR cradle.

1.Battery Installation

Your Boom Box can operate independently of AC power by installing 8 D-Cell batteries as follows:

NOTE: The batteries are bypassed automatically whenever the supplied AC Adapter is plugged into the DC 12V jack on the back panel.

-5-

128-7041

5 of 12