Battery Installation, Cabling Interconnections

COVER LATCHES

1.Battery Installation

Your Boom Box can operate independently of AC power by installing 8 C-Cell batteries as follows:

NOTE: The batteries are bypassed automatically

whenever the supplied AC Adapter is plugged into the DC 12V jack on the back panel.

	BATTERY	BOTTOM OF
	BATTERY	BOOM BOX
	COMPARTMENT	BOOM BOX
	COMPARTMENT
	COVER

NEGATIVEPOSITIVE

BATTERY
COMPARTMENT	NEGATIVE
(COVER REMOVED)	NEGATIVE

POSITIVE

3.Installing the Receiver in the JXM900B Install the receiver as follows:

IMPORTANT: Make sure boom box power is off before installing and removing the JXM900R Receiver.

1.Turn the Boom Box upside down to access the battery compartment.

2.Push the battery cover latches forward and flip up the battery compartment cover to the open position.

3.Insert eight (8) C-Cell batteries observing battery polarity as shown; then close the cover.

2.Cabling Interconnections

You can begin to enjoy XM® Satellite Radio as soon as the Receiver and Boom Box Kit installation are complete. Set up your Audiovox JXM900B by following theinterconnect diagram.

-6-

a. Press the EJECT button at the top of the JXM900B; the spring-loaded mounting plate will tilt forward. Carefully line up the receiver rear spine grooves with the guide spines on the mounting plate; gently push the receiver down onto the plate.

		RECEIVER
	RECEIVER	REAR SPINE
	RECEIVER	GROOVES
	REAR VIEW	GROOVES
	REAR VIEW

128-7377

6 of 16