RECEIVER | EJECT BUTTON | MOUNTING |
COMPARTMENT |
| PLATE GUIDE |
|
| SPINES |
MOUNTING |
|
|
PLATE |
|
|
JXM900R |
| CONNECTOR |
CONNECTOR |
| GUIDEPIN |
b. After making sure the connectors are properly lined up, gently press down on the receiver to mate the connectors together. The receiver should
now be attached securely to the mounting
plate. Press the receiver into position in the boom box housing; it will click into place. Apply power to the JXM900B by pressing the Power ON/OFF button; the LED indicator lights green. If the Receiver does not turn on at the same time, press the Power On/ Off ( 
) button in the upper left corner of the Receiver front panel.
4. Removing the Receiver From the JXM900B
Press the EJECT button on top of the Boom Box; the receiver will swing out automatically. Gently grasp each side of the Receiver at the top and pull straight up to disengage it from the mounting plate.
INSTALLING/REMOVING THE JXM900R
MOUNTING
JXM900R
RECEIVER
PLATE SWUNG
PUSH IN AT TOP TO SECURE IN PLACE
OUT
INSTALLED
7 of 16