Cypress SL811HS manual Document History, REV ECN no, Issue Date Orig. Description of Change

SL811HS

Document History Page

Document Title: SL811HS Embedded USB Host/Slave Controller

Document Number: 38-08008

REV.	ECN NO.	Issue Date	Orig. of			Description of Change
			Change
**	110850	12/14/01	BHA	Converted to Cypress format from ScanLogic
*A	112687	03/22/02	MUL	1) Changed power supply voltage to 4.0V in section 7.1
				2)	Changed value of twdsu in section 7.6.2
				3)	Changed max. power supply voltage to 3.45 V in section 7.2
				4)	Changed accuracy of adjustment in section 7.2
				5)	Changed bits 0 and 1 to reserved in section 5.3.8
				6)	Changed bit 2 to reserved in section 5.3.5 and 5.3.7
				7)	Changed bit 2 to reserved in section 5.3.1
				8)	Changed definition of bit 6 in section 5.3.5 & 5.3.7
				9)	Added section 5.1, Register Values on Power Up and Reset
				10)		Changed bit description notes in section 5.3.7
				11) Changed note about series termination resistors in section 7.5
				12)		Changed example in section 5.3.9
				13)		Changed J-K Programming States table in section 5.3.2
				14)		Added and removed comments for low-power modes in section 5.3.4
				15)		Removed sections specific to slave operation and SL11H
				16)		Removed duplicate tables
				17)		General formatting changes to section headings
				18)		Fixed all part number references
				19)		Added comments to section 7.5 and new definitions to section 2.0
*B	381894	See ECN	VCS	Went from single column to 2-column format. Combined information from
				SL811HS (38-08008) and SL811S/T (83-08009)
*C	464641	See ECN	ARI	Added lead free part numbers to new section Ordering Information and
				corrected references made to these parts. Corrected grammar. Added
				compliance statement in section USB Host Transceiver Characteristics.
*D	749518	See ECN	ARI	Implemented the new template. Changed Figure 4. Labels on pins 2 and 3
				were swapped; this has been corrected.
				Combined the 48-pin TQFP AXC Pin Assignment and Definition table with
				the 28-pin PLCC Pin Assignment and Definition table. Removed all instances
				of SL811HST-AC. Corrected the variables. Removed references to the
				obsolete SL11H.

Document 38-08008 Rev. *D Page 32 of 32