Kompernass KH 2295 operating instructions 15  

Page 15

MON

Æ

Monday

TUE

Æ

Tuesday

WED

Æ

Wednesday

THU

Æ

Thursday

FRI

Æ

Friday

SAT

Æ

Saturday

SUN

Æ

Sunday

ÔNote:

To carry out the steps 2 to 7 you have ca. ten seconds for each step. If one step is delayed, you must start again from step 2.

2Press the button “AL1” 2! again. On the lower edge of the display D the abbrevia- tions for all seven weekdays are shown.

3Press the button I once. The hour indicator of the alarm time starts to blink.

4Programme the hour indicator for the desired alarm time. To do this, press the buttons O resp. A.

5Press the button I again to change to programming the minute indicator. The minute indicator for the alarm time starts to blink.

6Programme the minute indicator for the desired alarm time. To do this, press the buttons O resp. A.

7Press the button I again to change to programming the weekday. Blinking in the display D are “ON” and “MON”. Here you can individually activate or deactivate the programmed alarm time for all weekdays:

ÚBy pressing the buttons U resp. I you can switch through the weekdays. The weekday just selected blinks in the display D.

Ú By pressing the buttons O resp. A you can switch between the setting “ON” and “OFF” for the just selected weekday. The

just selected setting blinks in the display D. With the setting “ON”, the alarm is switched on to the programmed alarm time on the selected weekday. With the setting “OFF”, the alarm is not switched on on the selected weekday.

Finally you must programme the type of alarm call required. Three types of alarm call are avail- able:

ÚAlarm call; radio: At the programmed alarm time on the selected weekday the radio switches itself on as the alarm signal. Thereby, the last radio station it was tuned to is switched on. The radio remains switched on for 60 minutes.

ÚAlarm call; alarm-tone: At the programmed alarm time on the selected weekday the alarm-tone switches itself on as the alarm sig- nal. The sound volume of the alarm tone rises gradually. The alarm tone remains switched on for ten minutes.

ÚAlarm call; alarm tone and radio: At the programmed alarm time on the selected weekday the alarm-tone switches itself on for ten minutes. The sound volume of the alarm tone rises gradually. Subsequently, the radio switches itself on for ten minutes. Thereby, the last radio station it was tuned to is switched on.

The currently selected alarm call type is shown in the display D through the following symbols:

Úalarmresp. for alarm call; RDS radio

Ú resp. for alarm call; alarm-tone

Ú resp.  for alarm call; alarm tone and radio

To programme the alarm call type:

15     

Image 15
Contents  Operating instructions Page U I O a S Page    Index   TroubleshootingTechnical data Safety InstructionsIntended use Items supplied Operating elements and displays   Preparing the RDS Radio Alarm for operationSetting the date and time Automatic setting of the date and time11   Manual setting of the date and timeManually setting and saving radio stations Using the RDS Radio AlarmUsing the radio of the RDS Radio Alarm Using the automatic radio station scanner13   Selecting saved radio stationsProgramming alarm times Using the alarm functionUsing the review function for saved radio stations Adjusting the volume15   Switching off the alarm function for the weekend Switching the alarm standby on/offEnding the alarm process Using the snooze function alarm inter- ruption17   Using the timer functions of the RDS Radio AlarmProgramming the sleep timer Programming the appointment timer Special Day AlertProgramming the Nap Timer Adjusting the display brightnessRDS Radio Alarm shows no functions Switching on the button lockCleaning the RDS Radio Alarm TroubleshootingOther malfunctions DisposalNo or poor reception of VHF/FM radio stations No soundWarranty & Service Importer21  