8Press the button “AL1” 2! once. In the display D the RDS radio alarm symbol 
for the alarm call type Radio blinks. Press the buttons O resp. 
A to switch between the three alarm call types.
9When you have selected the desired alarm call type: Press the button “AL1” 2! once. The programming for alarm time 1 is now saved.
The RDS Radio Alarm is now in alarm standby; shown in the display D after a few seconds are:
Ú“ALARM”
Úthetypesymbol for the programmed alarm call
Úthe programmed alarm time
Úthe abbreviation for the next weekday on which the alarm function will be switched on.
If you would like to programme a second alarm time (AL2): Follow the steps 1 to 9 in this chap- ter. However, at the steps 1, 2, 8 and 9 press the button “AL2” 2) instead of the button “AL1” 2!.
8.2.2 Switching the alarm standby on/off
To switch the alarm standby off: With the radio switched off, press and hold the button …
Ú“AL1” 2! to switch off alarm time 1
Ú“AL2” 2) to switch off alarm time 2.
In the display the indicators extinguish for …
Ú“ALARM”
Úthetypesymbol for the programmed alarm call
Úthe programmed alarm time
Úthe abbreviation for the next weekday on which the alarm function will be switched on.
To switch the alarm standby back on: Once again press the buttons “AL1” 2! resp. “AL2” 2).
8.2.3 Ending the alarm process
To end the alarm process when the alarm signal sounds: Press the button “POWER On/Off” S.
8.2.4Using the snooze function (alarm inter- ruption)
You can interrupt the alarm signal by pressing once on the button “SNOOZE” E. The ope- rational state display W now blinks. After ca. 9 minutes the alarm call sounds again. If you wish to interrupt the alarm signal once more, press the button “SNOOZE” E again. The alarm sig- nal can be interrupted any number of times.
ÔNote:
The alarm call interruption functions with all three alarm call types. With the alarm call type “Radio and alarm tone”, pressing the button “SNOOZE” E interrupts the alarm tone. After ca. 9 seconds it sounds again. If the alarm tone is not interrupted, it sound for ca. 10 minutes. Subsequently the radio switches itself on as the alarm signal. If the button “SNOOZE” E is now pressed, the radio is switched off. However, after ca. 9 minutes the alarm tone sounds again.
8.2.5Switching off the alarm function for the weekend
To switch off the alarm function for weekends:
1With the radio switched off, press the but- ton “Group WEC” once. F. In the display D “WEC” is shown. The alarm functions are now switched off for weekends.