Operations Common to Each Mode
Dimmer level | Setting the Subwoofer |
You can adjust the reduced illumination level of the dimmer.
The factory default setting is “LV3”. (Adjustment range is LV1 to LV5)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select the “ÅDIMMER LVΔ.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the reduced illumina- tion level of the dimmer.
You can set the subwoofer on or off.
The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “Å
3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.
4.Press the [T] button to return to the previous mode.
English
● LV1 to LV5:
The dimmer operation is performed depend- | Setting LOW PASS FILTER | |
The factory default setting is “THRGH” (Through). | ||
ing on the set level LV1 to LV5. | ||
If subwoofer function is set “ON”, “LOW PASS FIL- | ||
● OFF: | ||
TER” can be selected. | ||
|
No dimmer operation is performed.
4.Press the [T] button to return to the previous mode.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
The factory default setting is “8”. (Adjustment level: 1 to 18)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “ÅCONTRAST Δ.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the contrast.
4.Press the [T] button to return to the previous mode.
Anti-theft indicator
The red
The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “ÅBLINK LEDΔ.
3.Turn the [ROTARY] knob clockwise to set this function “ON” or turn it counterclockwise to switch this function “OFF”.
4.Press the [T] button to return to the previous mode.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
THRGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4.Press the [T] button to return to the previous mode.
Setting the external amplifier
The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select
3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.
● ON:
Use with connected AMP.
●OFF:
Use with inside AMP.
4.Press the [T] button to return to the previous mode.
DXZ745MP 23