Kicker RS56.2, RS65.2 manual Installation, Mounting

Page 5

Installation

Your Kicker RS-Series System Component drivers are specifically designed for mounting in free-air applications. The speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound coming off the front of the driver from the sound radiating from the back of the driver. This isolation is usually accomplished by using the correct size driver in a factory speaker location.

Mounting

Use caution when mounting speakers through the rear deck or package tray of a vehicle. Please be aware of wiring harnesses, trunk springs, hinges, and folding seat mechanisms that may interfere with the operation of the car or speaker system. When running the speaker wires, be careful not to damage them with seat bolts or door screws.

Note: To get the best performance from your Kicker RS-Series System Components,

we recommend using genuine Kicker Accessories and Wiring.

Installation

RS-Series System Components

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Models RS65.2 / RS56.2 Features Performance Mounting InstallationOptional Flush Mount Clearance Hole Door Body Mounting Nut Door Panel Tweeter MountingStep Wiring Options Wiring two RS-Series System Components to a single channel Warranty
Top Page Image Contents