Wiring Options

There are three sets of wires supplied with the Kicker RS-Series System Components. One set is designed to plug on to the terminal of the midrange. The other end of this wire goes to the midrange output on the supplied crossover.

The other two sets of wires do not have any connectors on either end. One set goes from the tweeter output of the crossover to the short wire coming out of the tweeter; join these wire with the supplied butt connectors. The last set of wires are used to join the inputs of the crossover to the outputs of your source unit or amplifier. Please see Figure 5.

Figure 5

Installation

If you have any questions about the installation of your Kicker RS-Series System Component Speakers, see the Authorized Kicker Dealer where you made your purchase. For more advice

Butt Tweeter

on installation, click on the SUPPORT tab on the Kicker homepage, www.kicker.com. Choose the Technical Support tab, choose subject you are interested in, and then download or view the corresponding information. Please E-mail support@kicker.com or call Technical Services (405) 624-8583 for specific or unanswered questions.

	SOURCE UNIT or AMPLIFIER
_	_
	107.5 FM THE END
+	+

Connectors

Midrange

RS-Series System Components