STEP 2 The remote control
∫Enjoying multi-channel surround sound
Amplifier with a | Coaxial cable | |||
decoder or a decoder- |
|
|
| |
|
|
| ||
amplifier combination |
|
|
| |
COAXIAL IN |
|
|
|
|
|
|
|
| |
Back of the unit
≥You cannot use DTS Digital Surround decoders not suited to DVD.
Change “PCM OUTPUT”, “DOLBY DIGITAL” and “DTS” (➜ 17, “AUDIO” menu).
∫Batteries
R6/LR6, AA
≥Insert so the poles (i and j) match those in the remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
setup
∫Connect the AC power supply cord last
AC power supply cord
To household AC outlet (AC 120 V, 60 Hz)
Conserving power
This unit consumes a small amount of power even when it is turned off (1 W). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control sensor (➜ 8), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
STEP 3 Quick setup
Preparation
Turn on the television and select the appropriate video input on the television.
1Press [Í].
2Press [SETUP].
QUICK SETUP screen appears.
3Follow the
≥Press [RETURN] to return to previous screen.
4Press [ENTER] to finish setting.
5Press [SETUP] to exit the setup menu.
≥To change these settings later, select “QUICK SETUP” (➜ 17, “OTHERS” menu).
RQTC0115 STEP 1 Connection/STEP 2 The remote control/STEP 3 Quick
7