Listening to the Radio
Press 
to turn the tuner on and change the band.
Each time the button is pressed
• Press 
if “ 
” is displayed. “ 
” disappears.
To obtain good reception
AM Try various directions to obtain optimum reception.
When listening to the radio on a train or inside a building, reception may be poor. Try and listen beside a window.
To turn off the radio
Press 
.
Press 
to tune to a station.
•To tune in AM or FM stations automatically (auto tuning)
Press and hold one of these buttons until the frequency starts to change continuously, and then release it.
(The frequency will automatically stop changing as soon as the first station is tuned in.)
•Select channels 
see right)
Adjust the volume by turning this control toward “+” or
To select stereo or monaural FM
Press and hold until “MONO” appears.
Each time the button is | No display |
pressed and held | (Monaural) (Stereo) |
| Noise is reduced |
FM/WEATHER
Extend the antenna cord and attach the antenna
suction cup to a wall.
Antenna suction cup
Antenna cord
Weather band
•Weather Radio broadcasts warnings, watches, forecasts and other information 24 hours a day on 7 VHF band frequencies (162.40 MHz to 162.55 MHz) in the U.S. and Canada, with each frequency serving specific areas.
Choose the channel for your area.
•For further information:
In the U.S. visit http://www.nws.noaa.gov/nwr/
In Canada visit
•This unit does not have an associated alarm function.
Storing stations in the memory
Store the frequencies of up to 30 stations: 10 FM, 10 AM and 10 Weather
Storing your favorite stations in the memory
Press 
to turn the tuner on and change the band.
Each time the button is pressed
Press 
to display “ 
”. 
Listening to preset stations
1 Perform steps 
and 
(left).
2 Press 
to select the memory number.
• Press and hold to make the numbers change rapidly. 
3 | Adjust the volume by turning this control toward |
| “+” or |
Store stations in the memory as desired.
1 Press and hold | until the frequency number or the channel number |
and “ ” flash. |
|
Do each of the following within 10 seconds.
When the original display is restored, proceed from step 1.
2 Press 
to tune to a station.
3 Press 
.
4 Press 
to select the memory number.
• Press and hold to make the numbers change rapidly.
5 Press 
.
The band number and frequency are set.
To store another station in the memory, repeat steps 1 to 5.
Setting the time
Example: Set to 3:30 PM (15:30) ( “-
Press and hold | until the hour display flashes. |
Press 
to set the hour.
• Press and hold to make the numbers change rapidly.
Press 
.
5
Press 
to set the minutes.
• Press and hold to make the numbers change rapidly.
Press 
.
The time starts.
Note
•We recommend adjusting the time regularly to maintain accuracy. (Monthly accuracy ±60 seconds)
•When you play a CD or the radio, the display changes but the time is displayed again after about 10 seconds.