Panasonic SL-CT470 operating instructions Using the Wired Remote Control

Using the Wired Remote Control

The remote control can be operated regardless of the hold mode			How to use the wired remote control
of the unit.
Preparation:				Press once during off or stop mode.	Turn during play.
Release the remote control from the hold mode.
s		HOLD 2			Skipping
	VOLUME
			To start play	PUSH	tracks
HOLD				(Beep)	s	PUS	r
						H

s

USH P

r

∫Operation confirmation tones

When an operation button is pressed, a confirmation tone sounds. Refer to the parentheses in the illustration for the differ- ent types of confirmation tones.

	Press once during play.
To stop play	PUSH
	(Beep...Beep)
	Press and hold during play or stop
	mode.
To turn off the	PUSH
unit
	(Beep...Bee...p)

Searching	Backward		Forward
through tracks	(Beep Beep Beep)		(Beep Beep)
	Turn and hold during play.
	When adjusting the volume using the
	remote control, position the volume
	control on the unit between 4 and 6.
To adjust the
volume
	s	r
	VOLUME		HOLD	2

Using the Unit with Optional Accessories Maintenance

Using the unit with an audio system

Use stereo connection cable (not included) to listen to CDs

Using the unit with a car audio	If the surfaces are dirty
	To clean this unit, wipe with a soft, dry cloth.
system	If the surfaces are extremely dirty, use a soft cloth dipped in a
	soap-and-water solution or a weak detergent solution.

through your home audio system.

≥Turn off the amplifier power and connect the cable.

≥Do not connect the cable to the PHONO jacks on the amplifier. ≥Obtain the optional connecting cable if the amplifier comes with

mini-phone jacks.

≥Adjust the volume on the amplifier.

Note!

≥Sound quality changes when S-XBS, TRAIN or LIVE is select- ed, but volume is reduced by about half.

≥You can connect speakers, active or otherwise, with an imped- ance of 1 k≠ or less to the headphone jacks. Set the unit’s vol- ume between 4 and 6.

Items to be purchased

For connection to the car audio system:

Car stereo cassette adaptor (SH-CDM10A)

Connect the car stereo cassette adaptor to the unit’s headphone jack. (When doing this, keep the unit’s VOLUME at a setting between 4 and 6.)

For securing the unit and connecting the power supply:

≥Car adaptor (SH-CDC9)

≥Car mounting kit (SH-CDF7)

≥Car mounting arms, Car insulator

≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

Maintaining the lens

Open the lid and clean the lens as shown in the figure. Use a cotton swab to gently wipe off any finger-prints. Recommended product: Lens cleaner kit (SZZP1038C)

Air blower for camera lens

Lens

OUT jack

6	5	4		Side panel of the unit
		RESUME RANDOM NORMAL HOLD	OUT

Amplifier

(White) L

To CD or AUX

terminals

(Red) R

Stereo phono cable (not included)

Note.

It may not be possible to use the unit with some types of car stereo owing to restrictions imposed by the construction of the

car stereo cassette adaptor.

Lens

For further details, refer to the instructions of the part concerned.

5