Other Play Methods
The letters such as B in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).
Skip play
The disc plays from the specified track through to the end, then play stops automatically.
Preparation: Put unit in stop mode.
1 Select the desired track.
B
2
H
Changing the sound quality
Press during play or stop mode.
EQ
D
The setting switches in the sequence indicated below each time [EQ] is pressed.
^==========b
Program play
Up to 24 tracks can be entered in the programmed se- quence.
Preparation: Put unit in stop mode.
1 Select the desired track.
B
2 Register in sequence.
(The indication “M” and the programmed se- quence appear on the display.)
MEMORY/RECALL
G
3 Repeat steps 1 and 2 to program all the desired tracks.
4
H
∫To program the same track in the se- quence more than once
∫After step 2, press [MEMORY/RECALL] desired number of times.
Repeat play/Random play
Press during play or stop mode.
MODE
F
The setting is switched in the sequence indicated below each time [MODE] is pressed.
] | |
One track is repeated. | |
v | |
All the tracks on the disc are repeated.
v | |
Random (RANDOM) | |
The tracks play once each in random | |
order and then play stops. | |
v |
Random repeat (RANDOM `)
The tracks play repeatedly in random | |
order. | |
v | |
Cancel (no indicator is shown) | } |
When pressed during program play
The setting is switched in the sequence indicated below each time [MODE] is pressed.
] | |
One track is repeated. | |
v | |
Memory repeat (`M) |
The programmed tracks are repeated.
v | |
Cancel (M) | } |
Select this setting to boost the
TRAIN:
Select this setting to avoid annoying other passengers with noise from your headphones/earphones while rid- ing on the train, or to reduce fatigue when listening for a long period of time.
Note!
The setting returns to
Anti-Skip System
This system deals with skipping in a variety of ways:
≥An
≥A recovery system immediately returns the laser pick- up to its original position if it is knocked off the track by a strong shock.
≥An anti skip memory (max. 48seconds) fills in interrup- tions caused by bumps and vibrations.
The
∫If “'” is displayed
∫No more tracks can be programmed.
∫To confirm the contents of the program
∫Press [MEMORY/RECALL] while the disc is playing. (The numbers of the programmed tracks appear on the display in sequence.)
∫To delete the entire programmed se- quence
∫Press [∫].
Note!
The repeat and random play modes are canceled after steps 1 and 2.
When bumps continue repeatedly
The elapsed playing time disappears and sound is inter- rupted.
|
| |
| RANDOM 1 M | |
E | C | VOL |
| ||
Note!
≥You can select the first track to play in random play and random repeat play by pressing [9] while the disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play during program play.
≥The resume function does not work when random or random repeat are on.
≥The mode is canceled when you disconnect the power source.
Note!
≥While the system is on, the disc rotates at a higher rate than usual in collecting extra audio data. This could result in a slight increase in disc rotation noise.
≥The
4