Panasonic DVD-K33 operating instructions Changing the player settings, Disc menu, Video menu

Changing the player settings

1

SETUP

Shows setup menu.

2

Select

ENTER

Register

Select the menu.

3

Select

ENTER

Register

Select the item.

4

Select	1	2	3
	4	5	6
ENTER
	7	8	9
Register		0	10

Make the settings.

5

SETUP

Press to exit.

Changing the player settings

RQTC0126

16

≥The settings remain intact even if you switch the unit to standby.

≥Underlined items are the factory preset.

≥The QUICK SETUP enables successive settings of the items in the shaded area.

∫“DISC” menu

SETTING STATE	Display the current setting of the items below
AUDIO	ENGLISH	CHINESE TRAD. ORIGINAL§1	OTHER----§2
Choose the audio
language.
SUBTITLE	AUTO§3	ENGLISH CHINESE TRAD.	OTHER----§2
Choose the subtitle
language.
MENUS	ENGLISH	CHINESE TRAD. OTHER----§2
Choose the language
for disc menus.
RATINGS	Setting ratings (When level 8 is selected)
Set a ratings level to	0 LOCK ALL: To prevent play of discs without ratings levels.
limit DVD-Video play.	1 to 7:	To prohibit play of DVD-Video with
		corresponding ratings recorded on them.
	8 NO LIMIT: To play all discs.
	When setting a ratings level, a password screen is shown.
	Follow the on-screen instructions.
	Do not forget your password.
	A message screen will be shown if a DVD-Video exceeding
	the ratings level is inserted in the unit. Follow the on-screen
	instructions.
PASSWORD	1 Select “CHANGE” and press [ENTER].
Change the	2 Enter the current password with the numbered buttons,
password for	then press [ENTER].
“RATINGS”	3 Enter the new password with the numbered buttons, then
(➜ above).	press [ENTER].

4When “VERIFY” is displayed, please verify the password and input it again.

∫ “VIDEO” menu

SETTING STATE	Display the current setting of the items below
TV ASPECT	4:3PAN&SCAN		4:3LETTERBOX
Choose the setting to suit your	4:3ZOOM		16:9NORMAL
television and preference.	16:9SHRINK		16:9ZOOM
TV TYPE	STANDARD		CRT
Select to suit the type of	LCD		PROJECTION
television.	PLASMA
NTSC DISC OUT	NTSC:	Output signals from NTSC discs remain
Choose PAL60 or NTSC output	PAL60:	as NTSC.
when playing NTSC discs.		NTSC disc can be viewed on PAL
		television.
STILL MODE	AUTO
Specify the type of picture	FIELD:	The picture is not blurred, but picture
shown when paused.	FRAME:	quality is lower.
		Overall quality is high, but the picture
		may appear blurred.
VIDEO OUT (I/P)	INTERLACE
Select “PROGRESSIVE” only if	PROGRESSIVE
connecting to a progressive	When you select “PROGRESSIVE”, a message
output compatible television.	screen will appear.

≥For progressive output, press [3] and then press [ENTER].

≥Press [RETURN] to cancel.

16