Panasonic CQ-VW100U operating instructions Balance/Fader, Bass, Treble

Basic Setting Screen Sound Disc Radio

Note:

¡The sound setting screen can be also activated by touchng Sound when the button is displayed (a page 14).

SQ3

SQ3 setting

Six SQ presets are already provided at shipment in this unit.

Balance/Fader

Balance/fader adjustment

Balance	(Sound level adjustment
	between right and left speakers)

[ : right enhanced

] : left enhanced

English

34

Flat : flat frequency response

Pop : wide-ranged and deep sound Rock : speedy and heavy sound Jazz : jazz-specific deep sound Club : club and disco-specific sound Vocal : clear sound

Fader

[ : front enhanced

] : rear enhanced

Setting range: Right 15 to Left 15 default: Center

(Sound level adjustment between front and rear speakers)

default: Flat

You may set your own SQ or modify factory presettings in each memories by following the instructions below:

Adjusting level of each preset

q Select the preset SQ that you prefer to adjust.

w Touch or to select a frequency in a fre- quency band (BASS/MID/TRE).

e Touch or to adjust each frequency.

Adjustable range: – 12 dB to + 12 dB

Adjustable frequency:

BASS;	60 Hz, 80 Hz, 100 Hz, 200 Hz
MID;	500 Hz, 1 kHz, 2 kHz, 3 kHz
TRE;	10 kHz, 12 kHz, 15 kHz, 18 kHz

Note:

¡The new level adjustment will overwrite the previous level adjustment.

¡For resuming the factory settings, touch and hold

Default for more than 2 seconds.

			Setting range: Front 15 to Rear 15
			default:	Center
Sub-Woofer
Subwoofer setting
Sub-Woofer			(Subwoofer speaker setting)
		: when using a subwoofer
On
		: when not using a subwoofer
Off
			default:
					Off
			(Subwoofer speaker output
	Level
			balance)

] : down, [ : up

Setting range: –12 dB to +12 dB default: ±0 dB

Bass/Treble

Bass/treble adjustment

Bass

[ : more

] : less

Treble

[ : more

] : less

(Bass adjustment)

(Treble adjustment)

Setting range: –12 dB to +12 dB default: ±0 dB

CQ-VW100U

35