Panasonic warranty Electrical Connections, 32 CQ-5800U, External Remote Control Lead

Electrical Connections

Caution

•This wiring information is for experienced technical individual, for safety reason, please your dealer wire this connection.

•This product is designed to operate with a 12 V DC, negative ground battery system.

•To prevent damage to the unit, be sure to follow the connection diagram below.

•Do not insert the power connector into the unit until the wiring is completed.

•Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and keep cable terminals free from touching any metal parts.

•Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased when the bat- tery terminals are disconnected.

❐Wiring Diagram

External Remote Control Lead

When using non-Panasonic external remote control, refer to the manufacture for their product before connecting.

CD Receiver

CQ-5800U

Antenna	(Rear Side)
	Power Connector

The power connector does not come along with the unit. If need, please consult your dealer.

	10	12	14	16
	9	11	13	15
	7	5	3	1
	8	6	4	2
Detail of power connector
NO.	FUNCTION				NO.	FUNCTION
1	BATTERY +12 V				9	REAR SP R (–)
2	GROUND				10	REAR SP R (+)
3	———				11	FRONT SP R (–)
4	———				12	FRONT SP R (+)
5	———				13	FRONT SP L (–)
6	POWER +12 V ACC				14	FRONT SP L (+)
7	———				15	REAR SP L (–)
8	———				16	REAR SP L (+)

(Red) Accessory Power(ACC)

ACC

(+12 V DC, negative ground only)

Ground

Battery

(Black) Ground Lead (Connect to a clean, bare metallic part of your vehicle)

(Yellow) Battery Lead

(Connect to vehicle battery)

		Illumination		(Orange)	Illumination Lead
					(Not used)
(Gray/Black)				(Violet/Black)
(white)	(Gray)	(Green/Black)	(Green)		(Violet)
(White/Black)

Left Speaker	Right Speaker	Left Speaker	Right Speaker
(Front)	(Front)	(Rear)	(Rear)

32CQ-5800U