Alarm operation
1Press and hold the ALARM button (3) and simultaneously press the HOUR
(6) or MINUTE button (7) to set the display to the desired alarm time. Release the ALARM button (3) to set the alarm time.
2Set the FUNCTION SELECTOR switch (14) to the desired buzzer or radio ‘AUTO’ alarm position. The ALARM ON indicator (11) will appear on the LED display (10).
Wake up to the radio alarm
1Switch the FUNCTION SELECTOR switch (14) to the ‘ON’ position to tune to the desired station.
2Set the BAND SELECTOR switch (13) to select either FM or MW wavebands as desired.
3Adjust the VOLUME control (15) to a suitable level.
4Slowly adjust the TUNING control (1) to the desired station.
5Slide the FUNCTION SELECTOR switch (14) to the ‘AUTO’ position. The ALARM ON indicator (11) will light. The radio station will wake you up at the set alarm time. The alarm will automatically turn off after a set period.
Ensure the station you select will be transmitting at the preset alarm time.
Wake up to the alarm buzzer
In order to check that the correct alarm time has been set press the ALARM button (3). The display will indicate the alarm time set.
1Slide the FUNCTION SELECTOR switch (14) to the ‘Buzzer’ position. The ALARM ON indicator (11) will light.
The buzzer alarm will wake you up at the set alarm time. The buzzer will automatically turn off after a set period.
P.5
To stop the alarm tone
The alarm is programmed to run for 1 hour 59 minutes.
1To stop the alarm, press the ALARM button (3). The alarm will stop and will operate again 24 hours later.
2To stop the alarm temporarily, press the SNOOZE button (5). The alarm will sound again 9 minutes later.
3To switch the alarm setting off permanently, slide the FUNCTION SELECTOR switch (14) to the ‘Off’ position.
Snooze function
The alarm can be interrupted for a 9 minute period.
1Press the SNOOZE button (5), after 9 minutes the radio or alarm buzzer will sound again.
To set the sleep function
Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time from between
59 minutes to 1 minute. Pressing the hour button (6) will extend the sleep time to 1 hour 59 minutes.
1Press the SLEEP button (4) the LED display (10) will show 0:59 sleep time at the same time the radio will come on and stay on for 59 minutes.
2Press and hold the SLEEP button (4) whilst pressing the MINUTE
button (7) or HOUR button (6) the sleep time shown on the LED display (10) will start descending.
3Release all buttons when the desired sleep time is shown on the LED display (10).
4After the set sleep time has elapsed, the radio will automatically switch off .
5To switch off before the set sleep time has elapsed press the SNOOZE button (5).
P.6
Maintenance
Do not expose your clock radio to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish.
Technical specification
AC Power supply | : | 230v | 50Hz |
Battery | : | 9V DC type 6LR61/PP3 (not included) | |
Radio | : | FM 88Mhz - 108Mhz | |
| : | MW 540Khz - 1600Khz | |
Warning labels
WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture.
ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer any servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of ‘dangerous voltage’ inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.
To prevent fire or shock hazard do not expose this apparatus to dripping or splashing.
Guarantee
Morphy Richards products are manufactured to internationally accepted quality standards. In addition to your statutory rights, Morphy Richards guarantee your product to be free from manufacturing and component defects for a period of TWO YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your Morphy Richards dealer from whom the product was purchased will be pleased to replace it free of charge.
Should your product develop a defect within the guarantee period but after the replacement period, please return the product to the following address, together with the proof of purchase, brief details of the symptoms and your own name and address.
Morphy Richards Limited
Talbot Road
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be repaired and returned to you promptly.
If you need any further advice, please call our Helpline (UK local rate) on: 08450 777700
www.morphyrichards.co.uk
446/8001/93 Rev 1
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
P.7