iHome iDN48 manual Stand, Power, Docking your iPad/iPhone/iPod in the 30-pin connector dock

quick start

1: stand

Back rest

OPEN

Stand

CLOSE

Gently pull backwards on the indent of the stand located on the rear of the unit and pull it into place for support mode. The retractable backrest will pop up to support a docked device. To close the stand, simply press back into place.

2: power

Attach AC adaptor cable to DC jack on bottom of the unit and plug the other end into a wall socket. A row of 4 blue LED indicators will light up indicating the unit has power and has begun charging the internal battery.

3: docking your iPad/iPhone/iPod in the 30-pin connector dock

Gently dock your 30-pin compatible iPad, iPhone or iPod onto the 30-pin dock on top of the unit. The iPad, iPhone or iPod will charge while docked. Use the controls on your device to play your iPad, iPhone or iPod. The 30-pin dock is NOT compatible with iPhone 5 and other Lightning compatible devices. To play these devices, connect them to the USB port using the cable that came with the device. Note that USB port will not charge iPad models.

DO NOT dock an iPad, iPhone or iPod without first opening the stand and popping up the backrest, doing so could damage the unit and/or your device.

4: connecting devices to the USB port

To play and charge Lightning and other iOS devices, connect them to the USB port on back of the unit using the cable that came with the device. Use the controls on your device to navigate and play your iPad, iPhone or iPod. The USB port will not charge iPad models.

2