Using the Unit
Playing Devices Using the 30-pin Dock
Lightning devices such as iPhone 5, iPad mini, iPad (4th generation), 5th generation iPod touch and 7th generation iPod nano will NOT dock in the
1.Dock an already playing 
Power/Mode Button until the Power/Mode indicator glows BLUE.
2.Use the controls on your iPad, iPhone or iPod to pause and play audio and to navigate tracks and menus.
3.Press the 
or 
Button to adjust the volume level on the unit.
4.Press and hold the 
Power/Mode Button to turn the unit off.
Playing Devices Using the USB Port
1.Connect an already playing iPad, iPhone or iPod to the USB port on the back of the unit using the cable that came with the device. The unit will turn on and the audio will play from your device. You can also turn on the unit by pressing and releasing the 
Power/Mode Button until the Power/Mode indicator glows GREEN.
2.Use the controls on your iPad, iPhone or iPod to pause and play audio and to navigate tracks and menus.
3.Press the 
or 
Button to adjust the volume level on the unit.
4.Press and hold the 
Power/Mode Button to turn the unit off.
Playing Devices Using the Aux-in Jack
1.Connect a 3.5mm audio cable to the headphone jack or
2.Press and release the 
Power/Mode Button until the Power/Mode indicator glows RED.
2.Use the controls on your device to pause and play audio and to navigate tracks and menus.
3.Press the 
or 
Button to adjust the volume level on the unit.
4.Press and hold the 
Power/Mode Button to turn the unit off. Remember to turn off your aux device, too.
Resetting the unit
If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so, press point of a pin or paperclip firmly into the Reset Port on the bottom of the unit to reset the unit.
4