Morphy Richards 27004 operating instructions Power Supply, Battery supply

Page 4

CONTROLS

Back of the set

-Battery compartment -Fold out stand

Display

Pressing the MODE button will briefly change the display mode:

-When the radio is off, the display indication changes between time and alarm time.

-When the radio is on the display changes between radio frequency, time and alarm time.

-If no button is pressed within 5 seconds, the display returns to the original indication.

POWER SUPPLY

Battery supply

Open the battery compartment and insert 4 batteries, type LR6, UM3 or AA cells. Ensure correct polarity is observed.

The battery low indicator lights up on the display, when the batteries are nearly exhausted.

Back-up batteries for preset memory

In order to keep the presets stored in the memory during the time that the unit is switched off, it is necessary to insert two additional back-up batteries.

Place these batteries size RO3, AAA, alkaline type in the battery compartment.

These batteries should always be inserted, regardless of the power supply (mains voltage or batteries).

If the unit is not to be used for a prolonged period, remove the batteries to avoid battery leakage.

In the interests of environmental safety, dispose of batteries safely.

3

Image 4
Contents Band portable radio Illustration DC 6Manual Tuning ControlsShortwave VHFPower Supply Battery supplyAC Mains Adaptor Supplied ClockAlarm Radio Page General Using your radio in Europe SW6Troubleshooting Problem Cause SolutionGuarantee