Settings
Vehicle Mode
If you listen to your inno in a vehicle, you’ve probably plugged the power adapter into the cigarette lighter socket. In some vehicles, the cigarette lighter is turned on or off with the ignition key; in other vehicles, the cigarette lighter is powered all the time. To prevent your battery from being drained, choose one of the following settings:
1.Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Vehicle Mode.
2.Choose one of the following settings:
| OFF | Choose this option if the cigarette lighter |
|
| is always powered. You must turn inno |
Auto ON/OFF |
| on or off using its own power switch. |
|
|
|
| ON | Choose this option if the ignition key |
|
| switches the cigarette lighter on and off. |
Delayed Power Off | OFF or | Another option if the cigarette lighter is |
| always powered: inno automatically turns | |
|
| off 60 to 180 minutes after you turn it on. |
|
|
|
3.The setting is saved even if you turn inno off. The vehicle mode setting is only active when you use the car dock.
Settings
Memory Partition
The internal storage in inno can store recorded XM content and MP3/WMA files. By default, the storage is divided 50/50, but you can select different memory partitions:
setting | typical storage for content | typical storage for PC | |
recorded from XM | (MP3 and WMA) tracks | ||
| |||
50/50 XM/PC files | 25 hours | 8 hours | |
|
|
| |
100% XM | 50 hours | 0 hours |
To change the memory partition:
1.Place your inno into the home dock and connect the AC power adapter.
2.Select XM ➝ Settings ➝ Setup ➝ Memory Partition.
3.Highlight the desired setting and press the XM button.
4.Confirm by selecting Yes, or cancel by selecting No.
CAUTION: When you change the memory partition, you will erase all your stored XM content and MP3/WMA tracks from your inno.
76 | Settings | Settings 77 |