Setting and removing the disc

How to Use Remote Control and Names of Parts Chapter 1

Insert the disc in the Disc loading slot with the label-side up. To remove the disc, press the Disc eject button on the right-hand side of the Disc loading slot.

❒Do not try to use discs other than a disc designed for this system. Please use only the disc specified by Pioneer.

Setting the PC card

Open the cover at the front of the main unit. Hold the PC card label-side up: the arrow shows the direction of insertion. Insert the card firmly until the PC card eject button pops out. If the main unit power is on, the PC card lock lamp changes from green to red, showing that the PC card is inserted correctly and ready for use.

Removing the PC Card

Caution

•Do not remove the PC card while the PC card lock lamp is red. It may damage the main unit of the Navigation System or the PC card.

Open the cover on the front of the main unit. Slide the PC card lock lever to the right (1), and hold it there. Check that the PC card lock lamp has changed to green, and then press the PC card eject button (2). (Keep holding the PC card lock lever to the right until the PC card is removed completely.)

❒PC card can be set or removed regardless of the power ON/OFF of the main unit (ON/OFF of the engine).

❒You can only use a card that conforms to the PCMCIA Type II (5V) standard. If you attempt to use a card complying with a different stan- dard, the card slot may be damaged, or a mal- function may occur.

❒Do not remove the card while editing the data on the PC card. The data stored on the Navi- gation unit and data on the PC card could be corrupted.

Pioneer AVIC-80DVD manual Setting and removing the disc, Setting the PC card, Removing the PC Card