PYLE Audio PDCD940MP manual Function of the Control Unit

Function of the Control Unit

B

u

f

f

er

M

emory

1. EJECT BUTTON

Press to eject the disc.

Note: Disc can’t be ejected unless the stop or pause button has been pushed first.

2. TIME / STOP BUTTON

This button switches the time display between total remaining time, each remaining time and elapsed playing time. The unit will be in the “stop” mode if you continue pressing the button for 3 seconds.

3. CONT./SINGLE BUTTON ( OUTRO)

To press this button it can switch between auto cue single and continue. The selected mode is indicated on the display.

*AUTO CUE SINGLE - After each track, the unit pauses at the beginning of next track. The playback starts from audible point.

*CONTINUE -To play all tracks continually.

*OUTRO - The unit will play the last 30 seconds of each track. Press the button for 3 seconds to switch OUTRO function.

Note: OUTRO is not available for MP3 music.

4. Multi functions / DIRECT ACCESS BUTTONS

*Multi function off

The buttons are direct access keys (0~9). To select the number of the

track you would like to play.

*Multi function ON

zNumber 0 : CUE Point Memory Clear Function。

Hold these two buttons for 2 seconds to clear CUE

Point data.

LCD shows[ clear memory ] for 2 sec

zNumber1：CUE Point Store Function。

Record new CUE Point Information , and LCD Display shows

[ Store□□□/○○○ ] for 2 seconds.

□□□：Present saved CUE point number.

○○○：Remain memory volume.

zNumber2：Recall CUE Point Function。

The function can be ON only in PAUSE mode and use JOG WHEEL to select the Cue points. After the CUE point is found, press Play button to activate.

LCD Display shows [ Buffer CUE ] Sec。

zNO function for Number 3-7

zNumber8： ID3 display select

Press the button to switch ID3 display item (File name / Title / Album / Artist )

zNumber9：Folder/File select button

Press these 2 buttons to enter the Folder/File select

mode. Use Skip button to search the Folder/File.

5.KEY ON/OFF SWITCH

Press the button to switch KEY mode on or off.

zKEY OFF: The display shows the “KEY” in blinking, and the key changed according to the pitch change. The key parameter adjustment is not in effect

zKEY ON: The “KEY” lights on the display, turning the SCOPE knob to adjust the key. Slide the pitch slider will also change the key.

zKEY LOCK: Press the SCOPE knob to lock the key as set, sliding the pitch slider does not change the key.

6.ON/OFF BUTTON (PITCH)

Press the button to be PITCH ON mode, press it again on the PITCH ON mode, and blinks with unit on the PITCH OFF mode.

7.PITCH BUTTON

Select the pitch change range from ±4%, ±8%, ±16%,

±100% (for CDDA), ±4%, ±8%, ±16% for (MP3 Playback). The playback speed will change when you move the pitch control slider.

8. RELAY

Press the “RELAY” button to activate. When one unit is in play mode, and the other unit is in “pause” mode; pause the playing unit, the other unit will automatically start to play (the button will blink)..

9.PITCH BEND + / - BUTTON

When each of the two CD players is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been adjusted. The pitch will automatically rise up to + 16% from the current setting while pressing the “ + “button. While pressing the “ – “ button, the pitch will automatically drop to - 16 % from current setting. By the way of changing the pitch the position of the beats can be matched.

- 4 -