iHome manual Using iP29, Using the Line-in Jack

Page 7

Using iP29

Using the Line-in Jack

1.Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your audio device and the other end of the patch cord into the iP29 Line-in Jack.

2.Switch the Power On/Off Switch to “ON” and the power on indicator will light up to show iP29 is on. You need to set your device to play too.

3.Press the + or Button to adjust the volume. You may need to adjust your device’s volume, too.

4.To switch off the unit, slide the Power On/Off Switch to ‘OFF’. Do remember to switch off your device, too.

4

Image 7
Contents Portable Stereo Speakers for your iPod / iPhone Consumer Guide to Product Safety Table ofContentsFCC Information Battery InformationMaintenance For Model Included Battery More Than One PieceIP29 Quick Start Front Panel Controls and IndicatorsRear Panel Playing and Charging your iPod/iPhone Using the iP29Installing/Replacing Speaker Batteries Connecting the AC AdaptorUsing the Line-in Jack Using iP29Consumer Guide to Product Safety Symptom Possible Problem Solution Trouble ShootingOr call 1-800-288-2792 Toll Free Consumer Repair DepartmentIP29-062609-A