iHome manual Using iH29, Using the Line-in Jack

Page 7

Using iH29

Using the Line-in Jack

1.Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your audio device and the other end of the patch cord into the iH29 Line-in Jack.

2.Switch the Power On/Off Switch to “ON” and the power on indicator will light up to show iH29 is on. You need to set your device to play too.

3.Press the + or – Button to adjust the volume. You may need to adjust your device’s volume, too.

4.To switch off the unit, slide the Power On/Off Switch to ‘OFF’. Do remember to switch off your device, too.

Image 7

Contents Portable Stereo Speakers for your iPod FCC Information MaintenanceConsumer Guide to Product Safety Table of ContentsIH29 Quick Start Top Panel Controls and IndicatorsPlaying and Charging your iPod Using the iH29Installing/Replacing Speaker Batteries Connecting the AC AdaptorUsing the Line-in Jack Using iH29Or call 1-800-288-2792 Toll Free Symptom Possible Problem Solution Trouble ShootingLimited 90-Day Warranty Information IH29-020609-A